1/64th Scale Shipping Containers

Free Shipping

Precision laser cut MDF shipping container kits to add to your diecast diorama. Easily built with PVA Glue*, this kit can be assembled with minimum fuss. Paints very well with...

Tags: 164accessory, 164scale, container, kits

Precision laser cut MDF shipping container kits to add to your diecast diorama. Easily built with PVA Glue*, this kit can be assembled with minimum fuss. Paints very well with Acrylics or Enamels, especially if used with spray primer.

Doors open and standard 1/64th scale cars from Hot Wheels, Matchbox etc., will fit inside.

Stackable on top of each other with pick-up pins on the top and cut outs on the bottom.

Size:
Length 130mm
Width 50mm
Height 54mm

Tools Required (not included)

- PVA Glue or Deluxe Materials Laser-Cut Kit Glue*
- Paints of your choice. Any modelling Acrylics or Enamels and Automotive primers and sprays

SUPPLIED IN KIT FORM

PLEASE NOTE: The cars are not included

* Any PVA glue works well. We highly recommend however the use of Deluxe Materials 'Laser-Cut Kit Glue' which we use to build all our structures. This little bottle will go a long way and build many kits. It has a fine needle applicator for less mess in the fine joints and dries very quickly. Its strong and will even glue the windows in place making it a worthwhile investment.

Service

All of orders are sent tracked and insured for peace of mind, this is reflected in the price of service. Decals are mostly sent via Royal Mail 2nd Class Recorded Service and larger items are sent either by Royal Mail 48hr Service or Evri.

Delivery

All decals are sealed in packs with user application instructions and sent in cardboard backed envelopes for added protection. All kits are flat packed and further protected internally with either bubblewrap or polystyrene. Kits are also cut to order and may take 2 to 3 days before despatch.

Warranty Information

Limited Warranty

All our products carry limited warranty to the original purchaser of the product(s) from ourselves SK75 Works.

Due to the nature of model making please inspect the product(s) before building kits or applying decals. We take pride in the quality of our product(s) and we offer a full exchange on product(s) that are subject to any manufacturing defects. We take no liability for any damage to the product(s) or item(s) you are applying it to when commencing the model building process. Once you have committed to cutting decals and gluing kit parts you are agreeing to be happy with the quality of our product(s) unless any manufacturing defects appear.

Inkjet or Laser Decals?

So whats the difference between Inkjet and Laser waterslide decals. There are pros and cons to both. Below is a quick rundown of each printing method.

Inkjet

Pros

- Vibrant colours

- Sharper detail

- All our decals come pre lacquered but you may wish to add an extra layer for peace of mind before soaking in water

Cons

- No white print or underprint to make them show on darker coloured backgrounds

- Cannot cut through a design as this will bleed the print (i.e textured wraps you cannot cut a small piece out of a sheet without it distorting in water

Laser

Pros

- No need to pre-lacquer, simply cut and use

- Can have white print

- Can have white underprint to show up design on darker backgrounds

- Can cut through a design without any bleed

Cons

- Not as vibrant and tones can appear muted

- Harder to colour match

- Higher costs

Ultimately then is if you want any white print or to have a design show up on darker backgrounds then laser decals are the preffered option. If its to show on a lighter background then inkjet for its vibrancy and detail is the one to go for.

In any decision we always recomend that once the decal is apllied, and at east 24 hours of drying time has passed, to then lacquer the model to seal in the decal. This helps the decal to not become brittle and detach over time and to give it a seamless finish between the model and decal.